The Ulmo Pro series featuring an IP67 resistant design and long battery life. The Ulmo Pro series is with built-in GPS receiver and 3G* connectivity allowing for real-time vehicle tracking the two-way job dispatch. The Ulmo Pro series integrates various data capture ( NFC*, camera ) in a compact device, improve productivity in retail store, hotels and restaurant.
Fleet management cradle and suction cup for the usage of windshield and dashboard.
- IP67 sealing.
- 1m drop resistant ( concrete ).
Redundant connectivity with 3G*, WIFI and Bluetooth® 4.0, NFC.
Comprehensive using scenario
Designed for multi-scenario, including: Retail, Fleet management & Utility, Field Service.
7”WSVGA 1024 x 600 IPS ( 400nits / 650nits* )
Capacitive Multi-Touch Screen, support glove and passive pan
ARM Cortex-A9 dual core ( TI 4430 1G Hz )
Mobile DDR2 1GB
16GB; MicroSD up to 64GB
WWAN module*: UMTS / HSPA/GPRS/EDGE
- UMTS: 850 / 900 / 1700 / 1900 / 2100
- GSM Full Bands: 850 / 900 / 1800 / 1900
- U-blox Lisa U200, co-layout SARA
WiFi 802.11 a / b / g / n
Bluetooth 4.0, support BLE
NFC*, sonsor on the front cover
miniUSB 2.0. PC Data Sync( client ), OTG for extension module*
USB Type A 2.0 ( host )
micro SIM card slot*
3.5mm Audio Jack, support Headphone + mic Audio-L, Audio-R, Ground, mic
pogo pins connector on back cover to support cradle
reserve holes for RAM mount capability on cradle
Build-in Speaker 1.5W x 2
Side: power, volume up / down, mute
Front: camera, P1 / P2 / P3 function keys
Battery life-up to 8 hours ( depend on user case )
N/A, charging status on screen
IP67 and 1m drop resistant to concrete
-10~+50℃ operating temperature
-20~+70℃ storage temperature
Humidity : 0~95%, Non-Condense
Altitude : Operating: 0~15,000ft, non-operating:0~40,000ft
Adaptor 5V / 2A
Power adaptor with power cord and plugs*
CE / CB, FCC / IC, BQB, e-Mark
H133.6 x W218 x D16.8 / 25.4 mm
with vacuum suction cup
one button release, support RE232, AV-IN, audio-out, charging